How to activate Kaspersky 2012 via license key

How to activate Kaspersky 2012 via license key :
One of the best news for you is that Kaspersky Labs allows you to register 3 months trial subscription freely. However, like 2010 version, Kaspersky Labs doesn’t allow you to activate the Kaspersky 2012 via license key file. In case you do not remember the activation code, just follow the simple steps to activate Kaspersky 2012 license.

1. Turn of your Internet Connection (In the below right connect, click on the Network icon and choose Disable or Access Start à Setting à Control Panel à Network Connection, then Disable Internet access).

2. On Kaspersky Internet Security 2012 Beta, click on“Insert your activation code here” one the right corner. Then click on Activate the application button.

3. Check on Activate commercial version box, then fill up with any number on the Enter activation code field (such as 1231234567, for example:-P). Click on Next.


4. Waiting for few seconds. You will get a notification that informs you don’t have an Internet connection “Internet connection is missing”. Then, you just need to click on Browse in the Key file field and browse the key on your hard disk to activate Kaspersky Internet Security 2012 Beta.

5. Enable your Internet Connection. Update KIS 2012 beta data and scan your computer now.

Note: If you have already activated the trial key (90 days), then click on the red X symbol next to License number to remove the old license.

You can download license key KIS 2012 beta here

Tips on caring for the personal computer

The personal computer may actually be long-lived and more durable than a personal computer provided you can properly care for personal computers. I wrote a bit about tips on caring for the personal computer, for those who want to read please do not be half-hearted to read through.

Computers purchased with the purpose to use, so after you buy it try to be always used, if necessary, every day should be used. If they are unable to use, or time to use is not possible, you should turn on just a few minutes then turn off again. This is done so that no condensation on the inside of the casing (CPU).

You know instead of dew? if you know of course understood that the moisture can damage the computer because it can cause a short circuit. My suggestion that computers are not allowed to die until more than a week, and it is best to use a computer every day.

Place the CPU in place Opened

The purpose of placing the CPU in the open does not mean putting the CPU in your backyard or in the park yes hehehe ... the point is placed where the CPU can get access to sufficient air so that the temperature conditions that exist in the CPU remained well preserved.

The place is usually closed soft spot for the house mouse, so you should not be stacked around the CPU other objects that may interfere with the existence of the CPU itself. Fentilasi holes that exist in the CPU not served until closed by the objects that surround the CPU.

Use Stavol As a Patron

Use as a protective stavolt existing electronic components inside the CPU. To stavolt advised not to use stavolt elktrik (stavolt usually as a bonus when buying a computer). Use stavolt Motor.

Between the motor and stavolt eletrik stavolt could easily be distinguished, namely if it stavol motor then if appointed stavolt is heavy because in it there is a fairly thick wire coil, whereas there is no stavolt electrical wire windings so it feels very light blade lifted.

How about after you read the Tips on caring for the personal computer, may be useful for you.

Tips on caring for computer external hard drive

You may be very disappointed if your external hard drive problems, this time I wrote about tips on caring for computer external hard drive. Simply to point-point:

Electrical Power

Do not turn off power by unplugging the USB cable without going through the procedure because of the hard disk spin so fast and stop suddenly and cause the reader head will rub against the rotating disc. The result is a bad sector. Therefore, according to the procedure natikan hdd (safe remove ardware)

Avoid Conflicts / shocks
At the hdd in the circumstances to work should be put in place that static does not move or vibrate. Do not knock or fall, the more so when copying data. Because of work affecting akam head. Head that floats above the surface of the disc would be interested in or away so that the reading of data is not normal.This condition can also cause bad sectors.

Keep away from the magnet power
Keep the hdd from objects that contain magnets such as speakers, cell phones, radios etc.. This will affect the data stored on the disc. Because the existing data on the disc occurs because magnetasi process. So strong magnetic power will damage the attached data.

Usage
If the hdd is used in a long time such as playing games or make hdd as a boot operating system, then work in the read write head will be even harder. It also can cause bad sectors

Timing
Frequently hdd off after 8 hours of continuous usage

Perform the defragment process
Perform periodic defragmet maybe once a month to set up space on the hdd. Use the empty space can menuyebabkan not well organized and will insert the other data. Consequently hdd work harder. Use the defrag tool that has been provided by Windows

RAM capacity
Large RAM capacity will reduce the process of swapping large files to the hard drive

How do you think? Please try, hopefully writing tips on caring for computer external hard drive is beneficial to you.